EASY STEPS FOR OPTIMUM CANDLE CARE

On the first burn, burn for a minimum of 1-3 hours to ensure an even melt pool on the surface.

 .• If cared for properly,  each candle will burn until the last of the wax is exhausted. However, for safety sake please extinguish the candle when it has about 10mm of wax remaining in the base.

• Ensure the wick is upright, above the wax and central before the wax sets.

• Always trim the wick(s) to 5mm to avoid sooting. Discard burnt wick trimmings before lighting to avoid smoke and damage to the glass. 

 

CANDLE SAFETY

• Only burn this candle on a level heat resistant surface, do not place directly on glass or marble surfaces.

• Burn candles out of reach of children and pets.

• Never leave a burning candle unattended. 

• Do not burn candle on or near anything that can catch fire.

• Never burn a candle for more than 6 hours at a time.

• Do not allow the flame to touch the glass.

• Glass will become hot during use,  do not move candle whilst lit. 

• Always leave at least 10cm distance between burning container candles.

• Extinguish the flame when 10mm of wax remains and do not relight. Scoop out the wax & use as a conditioning hand balm!

 

FRAGRANT REED DIFFUSER USE & MAINTENANCE

• Every two to three days remove reeds and turn upside down and return to bottle.

Fan out the reeds so that they are are not touching each other at the top.

• Ensure base of bottle is clean and dry of any Diffuser Oil, as it may stain the surface.

• Keep away from children and pets.

• Refills are available in PET bottles in 200mL size. Order from product range page. 

• When refilling, uncap stopper, fill with Diffuser Oil and replace reeds into neck of diffuser bottle.

 

SOY WAX MELT USE & MAINTENANCE

• DO NOT ADD WATER TO OIL BURNER SECTION WHEN USING WAX MELTS.

• Break 1 or 2 cubes into the melt section of the T-Lite/Oil Burner/Wax Warmer. Turn on or place lit Tea-Lite under melt section bowl.

• When fragrance has all but disappeared, allow burner to cool down. Remove all wax. Wipe out with paper towel.

• Place Oil burner on a level heat resistant surface, do not place directly on glass or marble surfaces.